I am a learner at Glen Taylor School in Auckland, New Zealand. I am in Room 12 and my teacher is Mr. Nikiforuk.
Thursday, 19 November 2020
Tuesday, 10 November 2020
Friday, 21 August 2020
My Exercise
Hi
Today I did some exercise with my cousins.
We did some lifting and cardio. For lifting I did 10 kg bench press 15 reps 3 sets. For cardio we went for a 2 km run and running up a steep hill. We did some push ups and sit ups. Bye
Thursday, 20 August 2020
Home Learning
Today for exercise went to run around my house (Outside) and did 20 Star jumps.
For learning I read a book and did some math questions from the books we got last lock down.
This Lock down was so shocking because I wasn't paying attention to the Covid-19 results.
Thursday, 30 July 2020
Smart Footprint
Welcome to my blog.
I love cars and in this Image you can see the different types of cars.
1st car: Nissan Skyline R34
2nd: S 15/Silvia
3rd: Toyota Supra MK4
4th: Nissan Skyline R34
5th: Honda Civic
Engine:
1st: RB26
2nd: Vtec
3rd: V8
Wednesday, 29 July 2020
Toaster Dude
Hi welcome to my blog and today I am gonna tell you about my book I read. The book I read was Toaster Dude and it was written by Little Bobler. The book is about a regular guy living his normal life and had always dreamed of owning a toaster. And one day the dream came true until people robbed him. So he went on the hunt to find the burglars and he found them and got revenge by taking his toaster back saving some people and blowing up their lair on accident. During that he put on his toaster on his head with the hole on the bottom of the toaster. Then he chucked on a cape to stand out from others. After that he only becomes toaster dude when he has to. Fighting crime along with his old high school mate.
Labels:
book blog post,
Cybersmart,
Daily 5,
gts,
learning,
smart footprint,
smart learners
Tuesday, 25 February 2020
Thursday, 12 December 2019
Principal For One week
If I was a Principal for one week I would:
1. Design the office put big stones around the office.
2. Change the paintings Put nice sunset n graffiti.
3. Build a cafeteria.
4. Make a quiet room for kids who don't like to play outside they can sit in the room and watch TV.
5. Build a deep swimming pool for the seniors.
1. Design the office put big stones around the office.
2. Change the paintings Put nice sunset n graffiti.
3. Build a cafeteria.
4. Make a quiet room for kids who don't like to play outside they can sit in the room and watch TV.
5. Build a deep swimming pool for the seniors.
Labels:
High School Week
Wednesday, 7 August 2019
Technology wood-The process
The process of making my Wood Truck
Step 1 I used a ruler,pencil,paper (A3) and a piece of wood to make a full size working drawing of my truck.
Step 2 I used a ruler,pencil and a Tri-square to copy the measurements from my drawing on to the wood.
Step 3 I marked a square line (at 90°) across and using a Tri-square.
Step 4 I cut off the first piece of wood using a backed saw and Tri-square.
Step 5 I then marked out the joint using are Tri-square,The cut piece of wood to mark the width and a marking gauge.
Step 6 I then cut out the joint using a backed saw
at.
Step 7 Then I chiseled it out with a wood chisel and a mallet.
Step 8 I put the small piece of wood into the joint.
Step 9 Then sir gave me a piece of wood for my cap of the truck to draw out the shape I want it to be in.
Step 10 Then Sir cut out the shape and sanded it.Then he glued it on to my piece of wood that will soon be a truck.
Step 11 After the glue was dried sir gave me a piece of slim wood that I measured and gave it to Sir to cut and glue on to my truck.
Step 12 Then I drawed out my doors,Lights,windscreen etc.
Step 13 Then I drawed some design/patterns on the back of my truck and put my wheels on last.
Step 1 I used a ruler,pencil,paper (A3) and a piece of wood to make a full size working drawing of my truck.
Step 2 I used a ruler,pencil and a Tri-square to copy the measurements from my drawing on to the wood.
Step 3 I marked a square line (at 90°) across and using a Tri-square.
Step 4 I cut off the first piece of wood using a backed saw and Tri-square.
Step 5 I then marked out the joint using are Tri-square,The cut piece of wood to mark the width and a marking gauge.
Step 6 I then cut out the joint using a backed saw
at.
Step 7 Then I chiseled it out with a wood chisel and a mallet.
Step 8 I put the small piece of wood into the joint.
Step 9 Then sir gave me a piece of wood for my cap of the truck to draw out the shape I want it to be in.
Step 10 Then Sir cut out the shape and sanded it.Then he glued it on to my piece of wood that will soon be a truck.
Step 11 After the glue was dried sir gave me a piece of slim wood that I measured and gave it to Sir to cut and glue on to my truck.
Step 12 Then I drawed out my doors,Lights,windscreen etc.
Step 13 Then I drawed some design/patterns on the back of my truck and put my wheels on last.
Labels:
Technology
Wednesday, 31 July 2019
"Technology wood"
I have chosen to make a truck
I think this is best choice because I can fiddle with it when bored
I will be used for a little toy truck
For this project I will have to consider that this project is strong, smooth and stable
I think this is best choice because I can fiddle with it when bored
I will be used for a little toy truck
For this project I will have to consider that this project is strong, smooth and stable
Labels:
Technology
Wednesday, 19 June 2019
WOOD WORK
I have chosen to make a jeep for my keys or small items
I think this is the best choice because I don`t have to look in my big draw for tiny things
It will be used like a mini storage
For this I will consider the size of the things that I will put in the jeep
I think this is the best choice because I don`t have to look in my big draw for tiny things
It will be used like a mini storage
For this I will consider the size of the things that I will put in the jeep
Thursday, 23 May 2019
Tuesday, 14 May 2019
Milk TO Butter
HOW to MAKE BUTTER
STEP 1. pour some cream in the jar,bottle or bowl shake or mix
STEP 2. shake or mix until it forms into butter [add salt] optional
STEP 3. Freeze until hard or eat straight away
STEP 4. EAT AND ENJOY
Thursday, 9 May 2019
Wednesday, 1 May 2019
Thursday, 14 March 2019
Blog profile
Hi my name is Abdul Zafar Mohammed.I go to Glen Taylor school in Glen Innes I am a Fijian muslim and I have two siblings and a little niece.My goals are to move to a higher level in every subject I am good at playing rugby and maths. I enjoy swimming my challenges are fractions and decimals
My role model is Ma'a nonu
This year I am looking forward to achieve my goals and become more fit and practice on writing. I like playing with my friends and studying.
Tuesday, 5 March 2019
Thursday, 28 February 2019
Subscribe to:
Posts (Atom)










